Kraft K-0271 thread locking agent

Features:

K-0271 (high strength thread anaerobic sealant) is a single component, medium viscosity, high strength anaerobic thread anaerobic sealant. The thread anaerobic sealant is cured between two closely matched metal surfaces and is isolated from the air.
 
Applications:
The threaded anaerobic sealant prevents loosening and leakage of threaded fasteners. Used for permanent locking and sealing of thread fasteners below M36 to prevent thread corrosion.
Typical use: Double-head stud screw-in end locking (such as cylinder head double-head bolts).
 
 
Performance after curing:
Full solidification time at room temperature (hr) 24
Breaking moment (N · m) ≥20
Average disassembly torque (N · m) ≥20
Working temperature (℃) -54 ～ 149
 
Instructions for use:
① The coated surface should be cleaned, dry and free of grease.
② Apply enough glue to the bolts to fill all the engaging threads. The thin rubber layer below 0.05 mm works best.
③ For extra-large threads, a large clearance will affect the curing speed and strength of the product. This product reduces friction (torque-to-tension ratio) caused by assembly. In applications where the thread needs to be tightened to a critical value, this ratio needs to be determined in advance.
 
Notes for use:
This thread anaerobic sealant is not suitable for use on plastic parts; in order to avoid contamination of the original glue solution, please do not pour the glue solution back into the original packaging.
 
Safety Precautions:
This thread anaerobic sealant contains methacrylate and has irritating effects on the skin and eyes. If it comes into contact with the skin, it should be washed immediately with water; if it comes in contact with the eyes, it should be immediately washed with water and taken to the hospital for treatment.
 
Storage conditions: Store in a cool, dry place under a temperature range of 15 to 28 ℃, with a shelf life of up to 24 months